QIDI Q2 FAN Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a simple model that only replaces the lower part of the standard duct.
- Ocena
- 4,667 / 5
- Polubienia
- 100
- Pobrania
- 507
- Wydruki
- 2
- Wyświetlenia
- 3908
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I recently bought a QIDI Q2. Initially, I was considering the Bambu P2S, but the Bambu was simply too expensive for my allowance.
When it arrived, I was surprised to find that the airflow from the model fan was weak.
At first, I thought the fan itself was underpowered. However, upon closer inspection, I noticed that the airflow from the fan was unregulated and simply spilling out, meaning the air wasn't effectively hitting the nozzle exit. This setup prevents proper cooling for certain print geometries.
So, I designed a duct to direct the model fan's airflow towards the nozzle exit.
It's a simple model that only replaces the lower part of the standard duct. Just using this has dramatically improved overhangs and bridging.
My next goal is to replace the fan (with one going from 0.1A to 0.22A).