1 / 3
Makita Belt Sander adapter for Bosch Dust Extractor/Vacuum — zdjęcie 1
1 / 3

Makita Belt Sander adapter for Bosch Dust Extractor/Vacuum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vacuum adapter for corded Makita Belt Sander (Model: 9924DB) to Bosch Dust Extractor

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This adapter was designed with a 135 degree angle to help clear the handle/switch of the belt sander.  The vacuum end attaches directly to the Bosch series (VAC090AH & VAC140AH) Dust Extractors with their stock 35mm hose.  I've included both the .3mf and Fusion 360 .f3d files so you can make your own versions if you wish.

Print Info

Filament: Inland PLA PRO (PLA+) Black from Micro Center, SKU 989269 

Printer: Prusa CORE One with HF 0.4mm nozzle

Layer Height: 0.2 mm, Balanced Profile

Perimeters: 3

Infill:  Grid, 25%, anything above 15% should be fine

Supports: Support on build plate only. This is just a small amount inside the base where there is a 5mm overhang to match the 32mm inside diameter of the hose.

Adhesion: None

Tagi