Christmas bauble ornament circles ball/one piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
72mm ball, in one piece, minimum supports, printed with prusament woodfill on slow speeds (btw great fillament)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Christmas ornament… a 72 mm ball printed in one piece, with minimal supports only at the bottom, printed with Prusament Woodfill PLA, btw nice smell, slow print. HF nozzle 0.5 with a layer height of 0.25; it could probably be done even without supports or with fewer supports using a smaller layer height. Feel free to try it out — I'd be happy for any feedback.
vanocni baňka.. koule 72mm v jednom kuse, tisk s minimem podpěr jenom na spodu, tisknuto s prusament woodfill pla, pomaly tisk. HF nozzle 0.5 s layer vyskou 0.25, asi by se dalo i bez podper nebo s jeste min s mensi vrstvou, klidne vyzkousejte budu rad za feedbeck..