BMAX B4 & B6 skirt for M.2 SSD heatsink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This skirt is intended to fit an SSD with a heatsink on the BMAX B4 and B6.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
The BMAX B6 didn't fit my NVME SSD with a heatsink. Modern high speed SSDs require a heatsink or good airflow, and I wanted to make it fit:

Due to the heatsink, the bottom lid cannot be screwed on, hence the fix:

I also have a BMAX B4 which has the same measurements. It likely fits on more BMAX mini PCs. Look at the CAD source files for the measurements to see if it fits on other models.
CAD source files are available at OnShape
I printed it with a Voron 2.4, concentric infill and a 0.5 mm nozzle. Smaller nozzle sizes should be fine too.