iPhone Charging Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A charging dock I've made for my old iPhone SE. Should fit most iPhones, but Max ones might be too wide. Requires cable.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is an iPhone charging dock I've made for my old iPhone SE that I keep permanently on my desk as a secondary phone.
It is two pieces, and the bottom piece is glued after the cable is inserted.
I've made this model specifically for AmazinBasics lightning charger, but most other soft shell cables should fit with some modification. I'd expect most iPhones apart from the Max models to fit. I've used an iPhone 12 mini on the render, and it fits perfectly.
I'd recommend filling inside the print with some form of weight. I've glued large bolts inside. I've also sticked a silicone pad underneath for added grip. I've printed this with CF-PLA with 0.12 layer height using a Creality K1-C.
Link to the cable I've used: https://www.amazon.com/AmazonBasics-Lightning-Certified-Charger-iPhone/dp/B07XS4LK28?th=1