1 / 6
Domoletti Toilet Seat Feet Extension — zdjęcie 1
1 / 6

Domoletti Toilet Seat Feet Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toilet seat leg extension for bidet

Ocena
0 / 5
Polubienia
5
Pobrania
19
Wydruki
0
Wyświetlenia
124
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Design Concept

I have added a Bidet attachment to my toilet and the seat was now sitting at a sloped angle. To fix this I designed these short toilet seat extensions/risers to level the seat back into position. This is designed for the Domoletti model toilet seat but may fit other seats (added pictures for model and measurements)

Function

Intended to be used to level toilet seat after installing a Bidet attachment

Printing Recommendations

At least PETG is recommended with additional walls for added strength. This is designed as a very tight fit. So force is needed to slot these in as I didn't want to use glue if it was loose. If the fitting is too tight you can try scaling the model down in your slicer to make it easier. 

Assembly Instructions

Remove the rubber nubs from the feet and fit the extensions and add the nubs back on to the feet. 

Tagi