1 / 6
Domoletti Toilet Seat Feet Extension — image 1
1 / 6

Domoletti Toilet Seat Feet Extension

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Toilet seat leg extension for bidet

Rating
0 / 5
Likes
5
Downloads
19
Makes
0
Views
124
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Design Concept

I have added a Bidet attachment to my toilet and the seat was now sitting at a sloped angle. To fix this I designed these short toilet seat extensions/risers to level the seat back into position. This is designed for the Domoletti model toilet seat but may fit other seats (added pictures for model and measurements)

Function

Intended to be used to level toilet seat after installing a Bidet attachment

Printing Recommendations

At least PETG is recommended with additional walls for added strength. This is designed as a very tight fit. So force is needed to slot these in as I didn't want to use glue if it was loose. If the fitting is too tight you can try scaling the model down in your slicer to make it easier. 

Assembly Instructions

Remove the rubber nubs from the feet and fit the extensions and add the nubs back on to the feet. 

Tags