Multiboard USB + SD holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB and SD Card holder for multiboard.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A small storage holder for Multiboard that uses Multipoint connections.
Holds USB drives (Both A and C), Full size and micro SD cards.
This design comes in sizes of 2 or 3 units in regular and diagonal variants. The regular version is intended for horizontal or vertical mounting with a Multipoint spacing of 25mm. The diagonal version is intended to be mounted at a 45 degree angle and thus has a larger spacing of ~35.35mm. Beware of this difference before printing!
Can be mounted to your Multiboard using e.g. This snap connector.
Prints in orientation provided, brim is advised. Note that the first layer contains a few small lines that connect the small contact area of the Multipoint connector to the main body for improved printability. These must be removed after printing.