1 / 3
Motorola TPG2200 Battery Cover with Clip and RFID Chip cavity — zdjęcie 1
1 / 3

Motorola TPG2200 Battery Cover with Clip and RFID Chip cavity

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Motorola TPG2200 Tetra Pager Battery Cover with Clip and RFID Chip cavity for identification or lock systems

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Motorola TPG2200 Tetra Pager Battery Cover with Clip and RFID Chip cavity for identification or lock systems. 

For removing the cover you need to use a small screwdriver or similar und pry the cover down from the pagers body carefully.

The Pager will not fit into the home station if this cover is installed!

The clip should be printed on its side for increased rigidity. The hole and the clip are 14mm, so it is a very tight to  pressfit. You might consider to decrease the height of the clip a little bit to make the assembly easier.

Tagi