1 / 3
Motorola TPG2200 Battery Cover with Clip and RFID Chip cavity — image 1
1 / 3

Motorola TPG2200 Battery Cover with Clip and RFID Chip cavity

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Motorola TPG2200 Tetra Pager Battery Cover with Clip and RFID Chip cavity for identification or lock systems

Rating
0 / 5
Likes
3
Downloads
27
Makes
0
Views
352
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Motorola TPG2200 Tetra Pager Battery Cover with Clip and RFID Chip cavity for identification or lock systems. 

For removing the cover you need to use a small screwdriver or similar und pry the cover down from the pagers body carefully.

The Pager will not fit into the home station if this cover is installed!

The clip should be printed on its side for increased rigidity. The hole and the clip are 14mm, so it is a very tight to  pressfit. You might consider to decrease the height of the clip a little bit to make the assembly easier.

Tags