Fx Impact GEN4 Magazine cal.22 x 30 rnd
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cheap alternative of cal.22 x 30 rnd. to the expensive Fx Impact Extended GEN4 magazine
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 234
- Wydruki
- 0
- Wyświetlenia
- 1259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Proved FX Impact Extended GEN4 magazine for 30 x 5.5mm (.22) pellets.
You will need to build a suitable spring or adapt one by modifying its connection to the case and crown. A spring of 19 mm x 0,02" is recommended.
This model, unlike the original, is loaded by inserting the pellet or slug clockwise (this design makes it easier to find a spring to modify because clockwise springs are more common). Here you will find a reference image of an original magazine.
Use an M4 screw as the axle and preferably a hot-insert nut. Print the stem horizontally to improve the case strength and glue it to the case with cyanoacrylate glue.
PLA with 30% infill.
Notes:
Do not force the pellet load into the chamber; if it does not flow smoothly, correct the forced position in the magazine with a circular file.
These magazines are not recommended for precision shooting with pellets. The spring tension when moving the pellets may slightly damage the skirt and affect accuracy. BUT: To check if this occurs, load two shot at the highest tension position, discard the first, and check if the crown movement deformed the skirt of the second. (No problem with slugs)
It has four holes to adjust the spring if you want to increase the tension for heavy slugs.