Updated Base for Sevro v1 LED Ring lamp, 1/4" / 6.5mm Dimmer hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New base to fit the recommended and linked LED dimmer with a 1/4" / 6.5mm shaft. PLA with the wide base down works.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed an updated base to fit the recommended and linked LED dimmer with a 1/4" / 6.5mm shaft. I printed it in PLA with the wide base down.
The recommended and linked LED dimmer on Amazon came with a 1/4" / 6.5mm shaft and the provided base has both holes sized as ½" / 12.5mm which only fit the 12V power receptacle. The version with only an ON/OFF button uses two larger holes, but not the dimmer version.
https://www.amazon.com/dp/B0D9LBCWGB
I did not edit the original, but created a new base from scratch.