1 / 1
Updated Base for Sevro v1 LED Ring lamp, 1/4" / 6.5mm Dimmer hole — image 1

Updated Base for Sevro v1 LED Ring lamp, 1/4" / 6.5mm Dimmer hole

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

New base to fit the recommended and linked LED dimmer with a 1/4" / 6.5mm shaft. PLA with the wide base down works.

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
52
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I needed an updated base to fit the recommended and linked LED dimmer with a 1/4" / 6.5mm shaft. I printed it in PLA with the wide base down.

The recommended and linked LED dimmer on Amazon came with a 1/4" / 6.5mm shaft and the provided base has both holes sized as ½" / 12.5mm which only fit the 12V power receptacle.   The version with only an ON/OFF button uses two larger holes, but not the dimmer version.

https://www.amazon.com/dp/B0D9LBCWGB

I did not edit the original, but created a new base from scratch.

Tags