Dummy 13 GU10 Lamp Remix (Socket Variation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a variation of SpaceKaseJase's "Dummy 13 GU10 Lamp Remix", designed to fit a different brand of GU10 socket
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
This is a variation of SpaceKaseJase's "Dummy 13 GU10 Lamp Remix", designed to fit a different brand of GU10 socket.
Required Parts
Fasteners: (2) M3 x 12 screws
GU10 Socket: Atron LA 99 (Available at Home Depot https://www.homedepot.ca/product/atron-gu-10-socket/1000133589 )
Print Notes
One of the uploaded models includes built-in support, which significantly reduces print time by eliminating the need for generated supports.
Ensure that the bridges at 54.80 mm are angled perpendicular to the main span as shown below:
Prusa Slicer setting:
Infill → Advanced → Bridging Angle
The supports are located on the interior of the structure. They can be broken away after printing, and appearance is not critical since they are hidden.
Assembly
Complete the print.
Attach the GU10 socket to the printed part using two M3 x 12 screws.
The socket should fit snugly into the designed mount.