U20CAM-1080P Camera Mount with Ball Swivel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print, without supports. Requires a bit of hardware but takes no time to print and assemble.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Designed for 3030 extrusion printer frame but works with any profile that can take M3 hardware. Hardware required:
M3 heat set insert
M3 x 6 to 10mm flat head
M3 x 12mm socket head for 3030
M3 T-nut for 3030
Print without supports.
Heat insert into the ball end
Screw the flat head through the rear camera frame into the heat insert.
Snap the camera and the front camera frame into the rear frame.
Prepare the socket cap screw by putting it through the ball clip and loosely attaching the T nut.
Tighten onto your profile
Snap the camera assembly into the ball clip.
Add a dab of CA glue to the ball to keep it in place if desired.
Optional STL file for a 25mm center to center ball arm extension. Great for getting that little bit of height or angle.