1 / 3
U20CAM-1080P Camera Mount with Ball Swivel — image 1
1 / 3

U20CAM-1080P Camera Mount with Ball Swivel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

License
Creative Commons — Attribution — Share Alike

Designed for 3030 extrusion printer frame but works with any profile that can take M3 hardware. Hardware required:

  • M3 heat set insert

  • M3 x 6 to 10mm flat head

  • M3 x 12mm socket head for 3030

  • M3 T-nut for 3030

Print without supports.

  1. Heat insert into the ball end

  2. Screw the flat head through the rear camera frame into the heat insert.

  3. Snap the camera and the front camera frame into the rear frame.

  4. Prepare the socket cap screw by putting it through the ball clip and loosely attaching the T nut.

  5. Tighten onto your profile

  6. Snap the camera assembly into the ball clip.

Add a dab of CA glue to the ball to keep it in place if desired.

Optional STL file for a 25mm center to center ball arm extension. Great for getting that little bit of height or angle.

Tags