12 and 18 inch long Hotwheels Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer pieces of track already modeled to self support while printing vertically
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 655
- Wydruki
- 1
- Wyświetlenia
- 4100
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
These are 12" (304.8mm) and 18" (457.2mm) track pieces that have already been oriented in a position to help self support while printing on taller format 3d printers.
I print the 18" model in about 10 hours with a 0.6mm nozzle and 0.4mm layer height. The print is essentially all walls and if filament is affordable it can be nearly as cost effective as ‘dollar store’ hotwheels track in the US (4ft for $1)
While not technically a remix i uploaded the 6" before as people may have an easier time printing it. But if you have a large printer it can be fun to print large parts.