Lens Wipe Caddy (Zeiss/CVS/etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple caddy to store Zeiss Lens wipes. Should work with a variety of brands.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have these lens wipes tucked into (seemingly) every cupboard, cubby, pocket, and bag that I own, annnd, some that I don't. The box they come in is pretty flimsy, and looks kinda tacky sitting out on a desk or table, so I built this one to class up the joint. It should hold 25ish pairs of wipes.
Since publishing, I"ve found some CVS brand wipes in the back corner of a bathroom cabinet. They fit too.
-- I can't be the only one with this problem...
Printing notes:
This was printed with Prusament Galaxy Black PLA, which, I know is wayyy to fancy for this kind of part, but it printed beautifully on the Core One with Prusament PLA default settings in Prusa Slicer..
I've chamfered the edges, so you shouldn't have problems with bed adhesion, but if you do, you can try printing it with a brim to keep your corners down.
The caddy is designed to hold this particular brand of wipes (which are about 55x30mm), and if you use a different brand, you might just get away with resizing one or both axes on the slicer if yours are different dimensions. Let me know if you do, and how it works out for you! :)
Designer's note:
Happy Printing! If you have any trouble, suggestions or feedback, please send me a note!
--Squirrel!