TP-Link TL-SG105 switch mount (screwed+fixed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated to fit newer TL-SG105 (TP-Link) with relocated mounting holes.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
My new TL-SG105 doesn't fit the original mount downloaded here. Vendor design changes perhaps?
The original mount peg positions are 14.33mm too far from the tab border and are also too big to get through the “+” holes on the switch.
What was done:
Support pegs repositioned.
Support pegs "cut" to a diamong shape to fit holes more easily (no sanding needed) and enable a perfect locking tab click.
Note: The locking tab must face backwards (face with the power plug)
Here are both versions pictured: Original (left) and my remix (right). Note the support pegs positions and diamond shape.
Print settings:
PETG / 21% infill / 4 inner walls / Grid sparse infill / Normal supports (just for locking tab)