Anti-Clogging Sink Drain Filter & Hair Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your pipes clear and prevent costly drainage blockages with this simple, highly effective sink filter!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Whether you need to catch food scraps in the kitchen sink or trap hair in the bathroom shower/basin, this minimalistic drain strainer does the job perfectly. It features optimized hole sizes that allow water to flow freely while catching even the smallest debris.
🛠 Key Features
Universal Utility: Perfect for kitchens, bathrooms, bathtubs, and laundry sinks.
Optimized Flow: Designed with maximum drainage efficiency to prevent standing water.
Easy to Clean: Simply lift it by the edge, dump the debris into the trash, rinse, and reuse.
100% Print-in-Place: Designed to be printed easily without wasting material.
📐 Print Settings
This model is optimized for rapid printing and requires zero post-processing.
Material: PETG or superior (ABS, ASA, Nylon). Do not use standard PLA, as the hot water from cooking, dishwashing, or showers will soften and warp the filter over time.
Supports: No (Designed to print perfectly flat on the bed).
Layer Height: 0.15mm - 0.20mm (Lower layer height ensures smoother holes and prevents grime from sticking to the layer lines).
Infill: 15% - 25% (Grid or Gyroid).
Perimeters (Walls): 3.
💡 Pro-Tip for Makers
Scaling: If your home drain has a non-standard size, you can easily scale this model uniformly (X and Y axes) in your slicer (PrusaSlicer / Bambu Studio) to fit your exact drain diameter!