Anti-Clogging Sink Drain Filter & Hair Catcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep your pipes clear and prevent costly drainage blockages with this simple, highly effective sink filter!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Whether you need to catch food scraps in the kitchen sink or trap hair in the bathroom shower/basin, this minimalistic drain strainer does the job perfectly. It features optimized hole sizes that allow water to flow freely while catching even the smallest debris.
🛠 Key Features
Universal Utility: Perfect for kitchens, bathrooms, bathtubs, and laundry sinks.
Optimized Flow: Designed with maximum drainage efficiency to prevent standing water.
Easy to Clean: Simply lift it by the edge, dump the debris into the trash, rinse, and reuse.
100% Print-in-Place: Designed to be printed easily without wasting material.
📐 Print Settings
This model is optimized for rapid printing and requires zero post-processing.
Material: PETG or superior (ABS, ASA, Nylon). Do not use standard PLA, as the hot water from cooking, dishwashing, or showers will soften and warp the filter over time.
Supports: No (Designed to print perfectly flat on the bed).
Layer Height: 0.15mm - 0.20mm (Lower layer height ensures smoother holes and prevents grime from sticking to the layer lines).
Infill: 15% - 25% (Grid or Gyroid).
Perimeters (Walls): 3.
💡 Pro-Tip for Makers
Scaling: If your home drain has a non-standard size, you can easily scale this model uniformly (X and Y axes) in your slicer (PrusaSlicer / Bambu Studio) to fit your exact drain diameter!