Elektron Digitakt & Digitone Stand WORKING WELLl!!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, strong 3D-printed desktop stand for the Elektron Digitakt and Digitone.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
A simple, strong 3D-printed desktop stand for the Elektron Digitakt and Digitone.
The stand lifts the machine into a more comfortable playing angle, making the screen easier to see and the buttons and knobs nicer to use. It is designed as two side supports with a clean, functional shape that keeps the device stable on the desk without adding unnecessary material.
The design prints easily with no supports and is a good upgrade for a studio, live setup, or home music corner.
Features
Fits Elektron Digitakt and Digitone
Comfortable angled position
Stable desktop support
Prints without supports
Simple and strong design
Uses little material
Easy to print and use
Good for studio, live setup, or synth desk
Print Settings
Supports: No
Material: PLA, PETG, or similar
Layer height: 0.2 mm recommended
Infill: 20–35%
Walls: 3+ recommended
Print one left side and one right side
Notes
Make sure both stands are placed evenly under the device before use. For extra grip, you can add small rubber pads underneath the feet.
Have fun. Change the world.