1 / 3
4" flex duct wye/tee fitting for exhaust/dust systems - no supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fitting for use with flex ducts or dust extraction.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A zero support wye/tee fitting for 4" duct systems. designed to print without supports! You'll need a brim, though, because there's very little contact area on the build plate.
it's 4" OD, so the duct slips over it. I printed in both ASA and PCTG and they worked fine. you'll want something a little tougher due to the thin walls and large size. Also wouldn't recommend printing in ASA unless you have a heated chamber.