Velcro Cable Binder Mount non-bridging
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize cabling using velcro with these screw in mounts. No bridging.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I designed these mounts to manage the cabling under my desk using Velcro. Unlike most 3D printed velcro cable organizers these do no require any bridging when printed "Upside-down". They should be oriented correctly for this in the model files.
These are designed to use with 12.5x1mm Velcro strapping, it's what I had lying around.
My old Ikea desk had some large holes in the frame which I put M6 rivet nuts in. Hence why I also added a relief for the rivet nuts so these mounts can sit flush against the frame. I feel like these would work best with countersunk screws (FHCS) but I added some variations for other uses. For those interested in remixing I added a simplified STL & STEP file in addition to the Solidworks part file.