Velcro Cable Binder Mount non-bridging
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organize cabling using velcro with these screw in mounts. No bridging.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I designed these mounts to manage the cabling under my desk using Velcro. Unlike most 3D printed velcro cable organizers these do no require any bridging when printed "Upside-down". They should be oriented correctly for this in the model files.
These are designed to use with 12.5x1mm Velcro strapping, it's what I had lying around.
My old Ikea desk had some large holes in the frame which I put M6 rivet nuts in. Hence why I also added a relief for the rivet nuts so these mounts can sit flush against the frame. I feel like these would work best with countersunk screws (FHCS) but I added some variations for other uses. For those interested in remixing I added a simplified STL & STEP file in addition to the Solidworks part file.