ICY BOX dock holder for Multiboard Underware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ICY BOX dock holder for Underware cable organization.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A rounded holder for the ICY BOX dock, model IB-DK4034-CPD, which keeps all ports easily accessible.
I have it attached to an Underware openGrid under my desk to have a single cable to connect to my laptop. The top mount is compatible with the Multiboard connectors, so it should work perfectly fine on a Multigrid rail as well.
It works great with these openGrid self-expanding snaps with screws, as it can be a bit heavy with all the cables connected.
The model is slightly longer than the dock to fit a 2×5 openGrid size.
Filament: PLA works well; other filaments may also be suitable but haven't been tested.
Layer height: I printed at 0.25 mm SPEED, but any setting will work.
Infill: I used 15% infill, but it should work without any infill.
Supports: No supports are necessary if printed upright (the 3MF file has the model oriented correctly).
The print in the photo has some artifacts in the middle left (right under the ICY BOX logo). This has been fixed in the model by splitting the bottom venting gaps in two for added support.
Modify
The FreeCAD source file is available in the Files section. Please feel free to make any modifications as needed.