1 / 4
Keyboard Foot Replacement - Take Me Knock (by Tracer)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement foot for the Knock keyboard from Take Me (by Tracer).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
The model is a simple keyboard foot replacement. It is an easy to print solution to repair broken keyboard stand.
Created for the Take Me (brand by Tracer) Knock USB keyboard, but could fit some other keyboards.
It is relatively fast and easy to print.
The dimensions:
20 mm width (not including pins)
22.65 mm length
6 mm height (the tallest point when laid flat)
2.45 mm pin diameter
3.35 mm pin length
Printing instructions
lay on the flat side to print
layer height matters - the lower the better (0.07mm for me)
0.4mm nozzle is great
print with supports
Tagi
smallsupportreplacementeasytoprintcomputeraccessoryfeetfootrepairusbkeyboardaccessoriespcfastprintfixsmallpartseasyprintcomputeraccessoriesrepairparteasyassemblyreplacementpartreplacementpartsreplacementsnozkakeyboardstandreplacementfootcomputerskeyboardfoottracersimpleprintcomputerfixcomputerrepairtoolreplacementfeetkeyboardfixtakemepcfix