Xanoy's Phone Holder with middle cutout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Xanoy's awesome phone holder with a middle cutout for easier cable management
- Ocena
- 4,833 / 5
- Polubienia
- 114
- Pobrania
- 1572
- Wydruki
- 17
- Wyświetlenia
- 4271
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the Xanoy's awesome phone holder with a middle cutout so you can pull the phone from the stand without having to disconnect the cable.
All the credits for this neat design go to Xanoy.
---
Print Settings
I printed the model scaled up to 125% to fit a phone with bumper. You can print the base with 100% infill to add weight to the stand, and the rest at 15% infill. I used a brim to be on the safe side.
Don't forget to add support for the middle cutout, otherwise it will not print correctly.
You can notice some dots of under-extrusion in the photos, but it has nothing to do with the model, this is either my print settings or inconsistency in the cheap PETG filament I used.