Elegoo Centauri Carbon Squash Ball Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squash ball feet for Elegoo Centauri Carbon. Reduces noise and vibration with a stable, low-profile design.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 837
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Enhance your printing experience with these Low-Profile Squash Ball Dampening Feet specifically designed for the Elegoo Centauri Carbon.
As high-speed printing often leads to unwanted desktop resonance, these feet are engineered to decouple your printer from the surface, significantly reducing vibration transfer and mechanical noise.
Key Features
Discrete Design: Crafted to be as unobtrusive as possible, maintaining the sleek look of the Centuari Carbon without adding unnecessary height or bulk.
Enhanced Stability: Provides a wide, secure base that utilizes the natural dampening properties of standard squash balls (Double Yellow Dot recommended for best results).
Recommended Print Settings
While these were tested and photographed in PLA-CF for a premium matte finish, they are compatible with any rigid filament (PLA, PETG, or ABS).
Walls: 3 perimeters
Infill: 15% (Gyroid recommended)
Supports: Tree with Top Z Distance set to .26mm
Files Included
SBF: Print 3 of these for the front and side corners.
SBFPS: Print 1 of these for the back corner to accommodate the power cable entry.
Recommended Parts
Im using the Dunlop Pro squashballs (the ones with 2 yellow dots on them) and getting good results. your mileage may vary with softer squashballs.