Ring Doorbell cover, wedge (battery Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a cover to mitigate water and rain getting to the charging port, and a wedge to angle camera from the door frame
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ring Doorbell (battery version)
this is a cover to mitigate water and rain getting to the charging port, and a wedge to angle camera from the door frame towards the centre of the door.
as designed its for the right hand door frame but if you want it on the left just mirror the model.
its in two parts, the wedge can be fixed first and then the cover attaches to it using the screws supplied with the doorbell when the ring back plate is attached.
Alternatively the cover can be used on its own, you may or may not need longer screws depending what your fixing to.
PETG is a great option
the two parts attach from the bottom sides as printed, id reccomend elephants foot compensation to avoid a ridge where it joins.
I printed 3 outer loops, 3 bottom layers, 5 top layers 20% gyroid infill - you could go lighter for sure.