1 / 2
Gamer Logo Wall Art (AR Fixed & Flipped for Textured Plate - Remix) — zdjęcie 1
1 / 2

Gamer Logo Wall Art (AR Fixed & Flipped for Textured Plate - Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the Gamer AR Logo wall art: fixed floating centers in A and R, flipped for clean textured plate print. No suppo

Ocena
0 / 5
Polubienia
26
Pobrania
142
Wydruki
0
Wyświetlenia
360
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Public Domain

Gamer Logo Wall Art (AR Fixed & Flipped for Textured Plates - Remix)

This is a remix of the original "Wall Art - Gamer Logo" by prodigy8.

Improvements:

  • Connected the floating centers in letters A and R – no more detached parts, stronger and cleaner print without supports or bridges!

  • Flipped the model so the visible front face prints against the build plate for a smooth, professional finish.

  • Optimized for textured build plates (structured PEI, etc.) – the texture transfers perfectly to the front for a premium embossed effect.

Ideal for gaming room decor, wall hanger, or gamer gift.

Recommended Print Settings (tested and validated):

  • Print face down (front against the bed, as provided).

  • Layer height: 0.28 mm (fast print with great results on textured plates).

  • Material: PLA works great.

  • Infill: 10-15% is sufficient.

  • No supports needed.

The model is quick to print and very forgiving. Feel free to share your makes, feedback, or further remixes!

Version française :

Art mural Logo Gamer (AR corrigé & inversé pour plaque texturée - Remix)

Remix du modèle original "Wall Art - Gamer Logo" de prodigy8.

Améliorations :

  • Centres des lettres A et R connectés pour éviter les parties détachées.

  • Modèle inversé : face visible contre le plateau pour un fini ultra propre.

  • Optimisé pour plaques texturées – effet embossé premium sur la face avant.

Parfait pour décorer une chambre gaming !

Paramètres recommandés (testés) :

  • Impression face contre plateau.

  • Hauteur de couche : 0.28 mm.

  • Matériau : PLA.

  • Remplissage : 10-15%.

  • Sans supports.

Tagi