1 / 4
Fujifilm XF 27mm easy-grip lens cap — zdjęcie 1
1 / 4

Fujifilm XF 27mm easy-grip lens cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy-grip lens cap for XF 27mm lens' screw-on lens hood.

Ocena
0 / 5
Polubienia
0
Pobrania
37
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

The Fujifilm XF 27mm F/2.8 lens comes with a screw-on lens hood, which in turn come with a small injection molded PE lens cap. It fits snuggly and appears neat, but is a bit hard to manupulate when using the camera. There's too thin a ledge to hold onto, and material is too smooth to grip with dry fingers in winter, even worse with gloves on.

Since the stock lens cap use friction grip to stay in place, printing a replacement is easy and feels natural. This model is dimensionally correct for fitting aforementioned screw-on lens hood for the XF 27mm F/2.8 lens. Please account for material shrinkage if you choose to use ABS or other shrink-prone material.

The Fujifilm logo on the front and markings in the back are set for 1x layer thickness of 0.16mm. 

Model made using TinkerCAD: https://www.tinkercad.com/things/6zjbau1pIFt

Tagi