Fujifilm XF 27mm easy-grip lens cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy-grip lens cap for XF 27mm lens' screw-on lens hood.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 37
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
The Fujifilm XF 27mm F/2.8 lens comes with a screw-on lens hood, which in turn come with a small injection molded PE lens cap. It fits snuggly and appears neat, but is a bit hard to manupulate when using the camera. There's too thin a ledge to hold onto, and material is too smooth to grip with dry fingers in winter, even worse with gloves on.
Since the stock lens cap use friction grip to stay in place, printing a replacement is easy and feels natural. This model is dimensionally correct for fitting aforementioned screw-on lens hood for the XF 27mm F/2.8 lens. Please account for material shrinkage if you choose to use ABS or other shrink-prone material.
The Fujifilm logo on the front and markings in the back are set for 1x layer thickness of 0.16mm.
Model made using TinkerCAD: https://www.tinkercad.com/things/6zjbau1pIFt