1 / 1
Prusa CORE One - Belt tensioner pulley for 6x6x1.8mm M3 square nuts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the Prusa CORE One belt tensioner pulley that uses 6mm x 6mm x 1.8mm square M3 nuts.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 832
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (20)Powiązane
The Prusa CORE One, like a lot of Prusa's machines, uses thin M3 nuts compliant with the DIN 562 standard. I needed to repair my belt tensioners but only had 6mm x 6mm x 1.8mm M3 square nuts available, the sort I could get in my local hardware store. This model adapts the Prusa-standard tensioner pulley to take these.
For best results, I had to apply an XY shrinkage factor of -0.4% when printing with PCCF, but you may need a different value depending on filament and printing conditions.