1 / 1
Prusa CORE One - Belt tensioner pulley for 6x6x1.8mm M3 square nuts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the Prusa CORE One belt tensioner pulley that uses 6mm x 6mm x 1.8mm square M3 nuts.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 180
- Makes
- 1
- Views
- 832
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1
The Prusa CORE One, like a lot of Prusa's machines, uses thin M3 nuts compliant with the DIN 562 standard. I needed to repair my belt tensioners but only had 6mm x 6mm x 1.8mm M3 square nuts available, the sort I could get in my local hardware store. This model adapts the Prusa-standard tensioner pulley to take these.
For best results, I had to apply an XY shrinkage factor of -0.4% when printing with PCCF, but you may need a different value depending on filament and printing conditions.