Stealthburner 3rd parts cooling fan duct (Cartographer probe mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3rd parts 3010 cooling fan for providing additional cooling power to Stealthburner for PLA and PETG
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The Stealthburner is a beast at printing ABS but can experience insufficient cooling when printing PLA or PETG, particularly at high flow rates. This mod adds a 3010 axial cooling fan behind the Cartographer V3 probe to provide supplemental part cooling.
Prerequisites
Cartographer V3 must be converted from Standard mode to Right Angle mode.
Recommended print material: ABS (consistent with standard Voron practice).
Print Settings:
→ 3 perimeters
→ 20% infill
→ Use brim
Mounting Hardware
2x M2x10 plastic screws
2x custom washers, made from 4x2 mm PTFE (Teflon®) tubing
