1 / 9
iFlag SimFlag holder for 3030+ aluminum profile
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built a multifunctional holder for the iFlags/SimFlags for the SimRig. It can be mounted on aluminum profiles 3030+
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I built a multifunctional holder for the iFlags/SimFlags for the SimRig. It can be mounted on aluminum profiles from 3030 and tilted/rotated in any direction.
You will also need:
2x M3x22mm screws
2x M3 nuts
1x <= M8 screw + NutX nut
The total printing time was about 50 minutes with my P1S at about 12 grams.
Nino