1 / 4
Concealed Wall-Mount Hanger – Slide-On and Hides Screw (Short & Long Versions) - NO SUPPORTS — zdjęcie 1
1 / 4

Concealed Wall-Mount Hanger – Slide-On and Hides Screw (Short & Long Versions) - NO SUPPORTS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sleek wall-mount hanger that hides the screw and brace, creating a clean look and easy install. No supports required.

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Keep your walls tidy and stylish with this 3D-printable concealed hanger. This design slides over a small mounted brace, perfectly hiding the screw and mounting hardware for a clean, professional finish. 

Features:

  • Designed to not need supports. Print the knob facing up and the brace on end with the 'beak' at the top. I used brims for both but you should probably at least use a brim for the brace.

  • Two sizes: Short (46.4mm) and Long (61.4mm)

  • Lots of room for the screw head for use with just about any screw type.

  • Easy to install: screw in the brace, then slide the hanger over

  • Clean appearance

I printed in PLA with ~20% cubic infill. Can adjust accordingly (more or less infill or different material) for desired strength, depending on what you plan to hang on it. This was printed on a cheaper 3d printer with not the tightest tolerance so the fit was perfect for me but should still slide on well using other printers.

Perfect for hanging coats, keys, bags, or decorative items while keeping mounting hardware hidden. Can be installed straight into the wall or onto a piece of wood with multiple hangers. For my use, this model was perfect for kids rooms mounted on a multi-knob board. Note that photos of actual prints are the long version of the model.

Tagi