Orc Warrior - Swordsman - Fantasy Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you enjoy my models, consider following me!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution
Enjoy my work? Find my full collection of work over on Patreon
Or
Show your support by buying me a coffee!
My Orc Swordsman
This one definitely needs some supports in some places. I used auto tree supports and removed some of the ones I thought weren't too necessary or would be difficult to remove.
Printing the sword at such a small scale can pose an issue if your printer wobbles or shakes too much. I ran into the issue and was able to fix it by adding supports to one side of the sword, but then you pose the risk of breaking the blade when removing the supports. I believe you could completely remediate the issue if you print at a larger scale.