20 mm leg extensions for IKEA BRATTVÅG Bed Leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20 mm extension for the 10 cm legs to allow cleaning robot the access to the area under the bed
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
20 mm extensions for the IKEA BRATTVAG bed legs.
I bought a new cleaning robot, which is a few mm higher than my old one and this haad problems to get under my bed. So I designed this extensions to higher my bed for 20 mm. I tried t design them, so they match the style of the legs.
You need to print one extension per leg. I used 3,5 x 25 mm wood screws to attach it to the bottom of the leg. I also glued felt pads underneath.
Print Settings:
Perimeters: 4
Bottom and top layers: 5
Infill: 25-30%
Infill pattern: gyroid
Now support needed
I used ABS because at the moment I do not have black PLA, but I think PLA should be also sufficient with this print settings.