NATO/Picatinny Flashlight Clamp with Fillets and Screw Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric flashlight mount with filleted edges, adjustable spring arms, and screw-down picatinny clamp for secure mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is an enhanced version of the original NATO flashlight clamp with several key improvements for better functionality and printability
New Features:
Filleted edges: Smooth, rounded edges on the C-clamp opening eliminate sharp corners for safer handling and improved aesthetics
Screw-down clamp: M3 screw hole with integrated hexagonal nut trap provides secure locking to picatinny/NATO rails
Adjustable spring arms: Independently controlled spring arm length (default 27mm) allows you to tune clamping force and flexibility
Parametric design: Spring arms automatically adjust angle to match any flashlight diameter while maintaining proper contact at the 90° points
Customizable Parameters:
flashlight_diameter: Adjust for your specific flashlight (default 15.8mm)fillet_radius: Control edge rounding (default 1.0mm)spring_arm_length: Tune springiness - shorter = more flexible, longer = more rigid (default 27mm)opening_angle: Adjust C-clamp opening (default 120°)All original parameters still available
Print Settings:
No supports needed for most orientations
Recommended: 3+ perimeters for strength
Insert M3 hex nut into trap before final assembly