RIKTIG Clip Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple model to cover the saw teeth of the RIKTIG clips.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple model to cover the saw teeth of the RIKTIG Curtain Hook Clips (https://www.ikea.com/us/en/p/riktig-curtain-hook-with-clip-80212201/). I wanted something that would prevent damage to paper i was hanging to dry. Less than 0.2g of filament per cover.
Print them flat on the bed and then bend to insert the teeth into the vertical slots. The single layer of plastic acts as a spring to help keep the cover inside the clip.
I'd recommend using a slightly more flexible filament than PLA. I used PETG but something with a higher yield strength would be better.