KYZ FF2 Desiccant Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
KYZ FF2 Desiccant Container
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a container for storing moisture absorbing pellets in a sealed container - according to the design:
https://www.printables.com/model/760336-kyz-ff2-high-flow-desiccant-holder
While using it, I felt the need to store dried pellets for use with new spools.
This makes the process much easier, as I dry the pellets in bulk in a food dehydrator on a mesh tray.
Then I simply fill them and store them in the containers.
I printed them with PLA with a standard profile and a layer height of 0.25mm.
The model requires supports - you can decide for yourself whether you want them internally, as I did, or rotate the model and use only the external ones.
Print time: approximately 2 h.
Used filament: 31 m.