IKEA FRIDANS Rod extender (prusa mini)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A IKEA FRIDANS rod extender to reach the rod easier.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A IKEA FRIDANS rod extender to reach the rod easier. I have quite high ceiling so the original design was a bit to short for my liking. I created this to be able to reach it. Just remove the small end cap and push this in. I actually put a small amount of glue on some of them in my home and some i just used a bit of electrical tape.
Printed on prusa mini with a 0.6 nozzle. because of the small size of the printer I needed to do a design that was able to be connected to eachother for longer rod. Not optimal and with a larger printer fewer pieces would have been needed.