1 / 3
Zeekr 7X - AirPods Pro 2 Wireless Charging Dock & Snus Holder (Right Side) — zdjęcie 1
1 / 3

Zeekr 7X - AirPods Pro 2 Wireless Charging Dock & Snus Holder (Right Side)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom-fit holder for AirPods Pro 2 on the right wireless charging pad of the Zeekr 7X. Features integrated cooling and

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
507
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This is a custom-designed holder for the AirPods Pro (version 2) that ensures they remain stable on the wireless charging pad in a Zeekr 7X. The model is specifically designed for the right-side charging pad. Please note that the pads in the vehicle are asymmetrical, so this version only fits the right side.

One of the key features of this design is that it utilizes the car's built-in ventilation from the charging pad. The airflow is directed under the holder to the AirPods case. Additionally, the plate includes a holder for a standard snus can or a tobacco pouch.

It is easy to install as it sits directly on the charging surface without needing any adhesive or screws.

Print Settings: I have successfully tested the model using PLA, but I strongly recommend using PETG, ASA, or ABS for the final version. This is because temperatures inside a vehicle can reach very high levels during the summer, which may cause PLA to deform.

The print is very straightforward and does not require supports. A layer height of 0.2mm works well, and an infill of 15-20% provides sufficient strength. If you need the holder for the left side, you can mabye mirror the model in your slicer. Although I have not tested this.

Tagi