USB Port Desk Mount / Holder (Screw-Down, Chamfered Cable Entry)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB port for clean cable management
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No supports! I had to enlarge the stl in cura to 102.5% but it did fit just a bit tight at regular size. Chamfered cable entry to ensure reduced strain on the cable. Can be used without screws however not as stable.
The usb extender is used was: https://amzn.eu/d/58FCGHE
To install, screw the mount down and then pencil over the area where the cable needs to go before removing the cover. Drill a few holes and file down until the usb is a tight fit (feed in from the top as the cable is thinner at the end ) and then slide the cover back onto the cable and secure.