Playstation Move Controller Strap Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bring out your inner Christmas tree with PSMove!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 1057
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
A mount for Playstation Move controllers to put them on your body for VR tracking.
Intended for PSMoveService + KinectToVR/Amethyst, to bring the hardware to SteamVR. However I heavily recommend using Externet's fork, PSMoveServiceEx which is much improved and is still updated.
Credit to Externet for making the original design, I've modified it to utilize velcro straps alongside some other optimizations for FDM printers. PSMove design at the bottom is by AuroraNemoia (TripingPC) from K2VR
Uses two zip ties to hold the controller in place, if you want it more permanently and firmly secured you could also use glue or double-sided tape in tandem with the ties. The two loops on the side secure one (or two, recommended) velcro strap(s) to mount them on your body.
Tip: Make sure the controllers face upward (buttons side face towards ceiling) for least magnetic interference when using the V1 (PS3 models) controllers which include a compass.