Liczymy pasujące modele…
This PSVR holder fits perfect and you will not see it when the VR is on the holder. Its simple for people that doesnt want any complicated constructions and their only goal is to hang the VR on the wall. You dont have to worry about it…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
Gcode files are PLA (I used Overture), .3mm draft, 15% lightning infill (For time/material savings). You will almost definitely need to turn off perimeters if you position on your own bed as well (Gcode should include this off by default)…
Wydruk około 5,87 €–7,18 € nettoWstępna wycena jednego wariantu
Scan of visor part of PSVR2, scanned with revopoint pop2 and revopoint mini. decimated in meshlab. incomplete , NOT 3d printing ready as not watertight, but might be enough for some projects. better scans might come. If you own a psvr2…
Comparing to Quest's controller PSVR2's grip button is very uncomfortable, espesially when you need to long press it to hold something, so I made this raiser to make it easier to press. Attatch to the controller with blue tack. Can be…
In this remix more room was added in the spool while also increasing strength at attachment point at base to decrease potential breakage. Height was increased in wire channel to accommodate both the aux plug and earbud wires. Note: photos…
Since the release of the PSVR2 I have been searching for knuckles straps for its controllers, and there have been none,
Print two times, one mirrored, for left and right hand side. Should be easy to customize if Headset does not fit. Headset connector just print two times, one mirrored Connector_Ziptie print two times, one mirrored use two zipties (max…
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones were way to narrow. Added cut-outs for less material use to the main body. Made the clip more flexible and replaceable, because mine…
I had a set of Kiwi clip-on headphones lying around from when I used the Quest 2, so I figured I could put them back to use on my current headset! These press a good bit on your ears, so you get a pretty solid sound from them. To attach…
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
Summary: A lightweight, super thin, replacement facial interface for the PSVR2. The design is as close to the lenses as is possible, Every user can achieve the max FOV possible. Weight: 28 grams vs 62g on the lonny-k model (including…
Simple yet effective under the desk mount for DC adapter delivered with PSVR2 PC adapter. Snug fit so it will not move easily.
The design was originally intended for mounting with flat head (chamfered) #6x1" wood screws, however alternatives with solidified, enlarged bases and insets are provided to enable mounting with double-sided tape. Note that the insets on…
Remixed for those who would like to mount it to their sim rig. Use 6mm hex bolts.
Printed in PETG. Designed for drywall screws. Adapter slides in and is held firmly by two tabs. Tolerance is tight.
I wanted to create a pimax headstrap which would have more adjustment then the vive das & would allow me to use my own headphones. I took a headstrap from a broken psvr & created a headstrap adapter which has at least some adjustment on…
This is a remix of the original clip with fixed dimensions, so it fits the remote snugly. Print settings don't matter all that much for this object, but for what it's worth I used 15% infill with a layer height of 0.2mm for my print.…
I tried to use my Index controllers with the PSVR2 using space calibrator, but the IR emitting base stations interfere with the IR based camera tracking on the headset, so I made a way to do it natively by attaching a 3.0 Vive Tracker.…
I was pretty annoyed with the PSVR2 not having any built in head strap audio, so I picked up a Vive DAS on Black Friday for 16$ and used the headphones for this. I tried to position them so that they float over your ears like the Index.…
This is a simple mount for a PSVR (1) break out box. I printed it in PLA using regular settings, 20% infill, flat side down with supports. There's no screw holes since I used double-sided tape to mount
The entire text has been translated. This is a simple model that improves the stability of the helmet, thanks to which the goggles do not fall down on the nose. Printing without supports 10% infill 2 walls 0.20mm layer I used Velcro…
Can be printed without supports, but I needed a 3mm brim to keep it from coming off the print surface. I printed with 20% infill, with modifiers at the screw holes to have those at 70% for more strength.
Will fit either Sense controller, print two! No supports needed! Printed in PLA at .2 structural on a MK4S.
I needed an under desk mount for my PS4 VR processor unit. I needed it to hang lower than the surface it was mounted on, so it would clear the lip on the front of the desk. This is for the second version of the PS4 VR processing unit. The…
It's recommended to print this flat side down with no supports. Make sure “Bridge counterbore holes” is set to “partially bridged” in Prusa/Bambu/OrcaSlicer so that the bridge layer is printed properly. For other slicers maybe just use…
PSVR2 Headset front scan for making custom mounts. Scanned with a Creality CR-Scan Raptor with an accuracy of 0.1mm. It could be more accurate than this, but I ran out of RAM with a 0.02mm settings so that's all I can do. In case you're…
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
These pieces are designed to make it straightforward to attach a Vive DAS to a PSVR2, using M3 nuts/bolts or hot glue/VHB tape. The stock facial interface needs to be unscrewed for the custom interface to take its place, the visor must be…
Stand to hold the controllers upright with an inset guide channel for the USB-C cables set into the base. Two versions are included + the CAD for both. One circular/spherical & the other rectangular for individual preference. The circular…
This is a custom design I made for my PSVR Processor Unit. I needed to keep it out of the way while at the same time stop it from flying about while connected to the headset. I have modelled in some pilot holes but if you need to make…
If you wear thick specs like mine and want to stop marking your psvr lenses with your glasses then print 2, these are blu-tacked or double sided taped onto either side of the lens and stop specs from contacting the lens. Also holds your…
Attach your PSVR2 to the Meta Quest 2 headstrap for next-level comfort! This simple 3D printed adapter securely mounts your Quest 2 onto the Meta Quest 2 headstrap. Designed for the Meta Quest 2 headstrap and PSVR2 Snug, secure fit…
The top strap model remixed from LonnyK's DAS mount, with the strap loop shrunken to better fit the Rift CV1 top strap. Like the original model, the original halo strap must be removed. You will need the same screws attaching the original…
Thinner version of the facial interface replacement by LonnyKThinner version of the facial interface replacement by LonnyK. Gets you closer to the lenses; about 5mm.
Lately I havent been able to play my PSVR due to poor room management. The camera is designed to sit upon a TV, but I play to the left in front of my bookshelf thus giving me bad tracking and dangerous mounting. Then it hit me, I could…
Hello, Today I have a holder, stand for the PSVR camera playstation 4 (V2) for you. It is suitable for a table or a shelf. It holds beautifully, even in the position when you turn it. It can be adjusted nicely. It is better to stick the…
Hello, Today I have for you a Holder, a stand for the PSVR camera ps4 from v2 to v1. It is suitable for attaching the V2 camera to the V1 camera. It holds beautifully, even the position when you turn it. It can be adjusted nicely. It is…
Hello, Today I have a Holder, Stand for PSVR Camera PS4 (V1) for you. It is suitable for mounting the V1 camera. It holds beautifully, even the position when you turn it. It can be adjusted nicely. It is better to stick the base to the M3…
This is a remix of the “PSVR2 IEM/Earbud Adapter” by s16n. Thank you! My version makes a few quality-of-life improvements: Wider cable channel so the earbud cable can loop back and forth up to four times without binding Corrected hole…
Summary: A lightweight, super thin, replacement facial interface for the PSVR2. The design is as close to the lenses as is possible, Every user can achieve the max FOV possible. Weight: 28 grams vs 62g on the lonny-k model (including…
Designed for 1.5" T-Slot extrusion. Required hardware: 4x M8 14mm hex socket head screws (16mm works too, in a pinch) 4x M8 T-nuts 2x M4 16mm - 20mm screws Print the base with supports for the underside. Attach top to base with 2 M4…
This is to hold a (fairly?) standard sized LensPen (Nickon LENSPEN from Amazon ) and the cloth that came with the Playstation VR headset on the Collective Minds VR Showcase, which is awesome. eyd is not cut out of the uploaded model, but…
this is a fork of printables.com/model/1507930-psvr2-replacement-facial-interface-with-optional-i i fxxxking hated how the mask clips was designed so silly, because i printed the mask and broke it immediately. so redesigned a bit and made…
This is an attachment clip for a Playstation VR2 controller (PSVR2). It allows me to attach things solidly to the controller. I am using it for the purpose of attaching a drumstick to my controller so I can use it as a putter attachment…
Wall mount Bracket for the older Square style Camera. Designed so the it sits on top and the last bend comes out to lock it in place. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9UhxVgB54Bi…
This is a small piece to print (twice) for affixing to your PSVR for people who wear glasses. This is thought to help reduce scratches on the PSVR lenses (and your glasses?). Why the remix? I wanted smoother lines, different fillets, and…
PSVR camera mount with no need for screw or tape, hold the camera on top of your TV by it's own weight. Measure the thickness of your TV, and the angle of the camera. Print 2 of these and just put them on your TV! Category: Video Games
PSVR ProcessorUnit Stand. See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/2961 ) Print instructions Category: Video Games Print Settings Printer: DeAGOSTINI idbox! Rafts: No…
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones in the original were way to narrow for me. REMOVED cut-outs for cleaner prints and not bombarding the poor printer with retractions.…
use this housing to mount the main cable and the audio output on your modified strapless PSVR
I bought a used PSVR but it didn't come with the camera stand, so I decided to design and print one! It fits the camera nice and snug, so you can rotate the camera in it and it'll hold its rotation. I put some of these rubber feet on it…
A little riser tray to hold the PSVR processor box. That little box gets really hot and I had mine on top of the PS4. I thought it would be a good idea to give them both a little breathing room. Print instructions The legs for the riser…
Designed for use with my rig but maybe useful to a desk or other situations. Printing: I used PLA, and printed it the simplest way: pointing straight up with maybe 25% infill. That'll work fine if your printer has good layer adhesion.…
This works well for my PSVR2. There are a few choices for the base that add extra weight in the front to reduce tipping over backwards. See the STL files for the base choices. I printed the simple ‘front bar’ one at first and then the…
Fast 3d scan with Revopoint Pop2 3D scanner, some cleaning, smoothing and polycount reduction to 250k in Zbrush. Better scan to come but already should be enough for some projects. Simply mirror the model for the other controller.
This is an insert for the PSVR2 Sense controller that offers basic parity with the Valve Index Knuckles controller (the controller encases the hand so you can fully open your hand without dropping the controller, this is very helpful for…
All VR lens adapters out there have lens attached completely flat. Actual eye glasses mount lens at a slight angle forming a curved surface. For me, the flat mounted lens cause my peripheral vision to be distorted (straight lines look…
Protect PSVR2 USB-C plug and PS5 USB-C socket in case of accidental cable pulling to sides. Printed from PETG, 0.4mm layer, 15% infill. Any (almost) settings will work. Fusion 360 source included.
Update: V2 is released! Improvements include: Improved/intentional controller mounting spots previous spots to hold controllers were a happy accident Improved cable holder made it shorter, made the securing angle steeper Improved headset…
Use TPU The plug should be pressed through (it's separate to remove the need for support) Press the cable into the channel on each side Support should not be needed You could print the main body in PLA/PETG, but the plug really needs to…
I really liked the design by awarring300, which was continued upon by 3lacksky, but they were too big to print on my Prusa I3, so i decided to split up the handles in fusion360 so i could print them separately. Post-Printing Just acetone…
Link to the fusion 360 design files https://a360.co/2UpffmD Also needed are 2 x M2 screw (black) and 1 x M4x40 alan head bolt To fit just remove soft earbud holders and push fit into hole. Print instructions Category: Props Summary Link…
The mount is as per the original design by therippa. I have just added a 3d printed nut to save having to add any additional hardware. Print instructions Category: Computer Summary The mount is as per the original design by therippa. I…
Please look at the original: Playstation VR2 (PSVR2) Headset Stand (updated Mar 4) von psybertech | Kostenloses STL-Modell herunterladen | Printables.com
I needed a place to put my PSVR2 away that helped to keep dust off of the lenses. This model also was made so that I could attach it to my Ikea Skadis board. I'm using 8/32" hardware to mount it as I wanted it to be secure.
I printed this with PETG standard settings. I've included the STEP files so that the leg height can be modified as needed. I did NOT glue the pieces together. The stand was intended to be able to be disassembled and reassembled to put it…
After careful measuring and precise design of subtracted material this is a lightweight and NO SUPPORT NEEDED print that, with a normal printer, can print in about 4-6 hours according to settings. I used .2mm layer height and, for myself,…
My personally designed PlayStation VR stand was made with sleek style and functionality in mind. Its tilted headband bracket and forehead rest is positioned at such an angle where when strapped on, the VR sits fairly level and facing…
Tracking with the PS Camera for Playstation VR is improved if the camera is elevated. The included camera stand can be placed on top of your TV but requires you to be directly in front of the stand, in my living room I sit off to the side…
couple of features charging cable tunnel , you can charge controllers while placing it on the stand print this completely supportless on FDM printer. have fun , i am starting a patreon where u can find my newer designs, please follow me…
Cable clip that holds your VR headset cable on your belt. Easy print, no supports needed.
I modified the Top & Bottom part fastening setup so that no HW needed. Category: Toy & Game Accessories
The PSVR's cable hinders the head movement if it stuck somewhere. This cable clip can be adjusted for the perfect length allowing the full comfort. Obviously, the clip can be used with any headset cable. Category: Toy & Game Accessories
The PSVR headset was laying on the floor so I thought of 3d printing a hook that could be attached to the IKEA furniture. I did not want to use screws, so I created it large enough to support the headset. remember to use silicon, is very…
A very simple model to fix the new PSVR2 adapter below your desk. Screw holes are for 4x16 screws. Anything with a screw head diameter above 6mm should work.
Quick and dirty print for mounting a PSVR 2 PC adapter underneath a desktop. Please remix this and make a better one!
You might want to print it with 50% infill with 3 shells Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: pla Category: Video Games
Easy to print, minimal Skadis holder for Playstation PSVR2 to PC adapter
