Rear Fender Support Clip for Cannondale Topstone EQ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small clip-on support designed for the Cannondale Topstone EQ rear rack and fender.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I created this part to solve an issue where the rear fender starts to sag over time, putting strain on the integrated rear light cable. In my case, the sagging eventually caused the cable to be pulled out of the rear light. This clip adds a solid support point between the rack and the splash guard to keep everything properly aligned.
Features
Clips around the rear rack tubing and the splash guard
Prevents the splash guard from sagging
Reduces stress on the rear light cable
No screws or permanent modifications required
Designed specifically to fit the Topstone EQ rack geometry
Lightweight and discreet once installed
Installation
Simply clip the part onto the rear rack tubes
Snap the fender into the lower hooks
No tools required
Can be installed or removed in seconds
Printing Instructions
Material: PETG or ABS recommended (PLA may soften in summer heat)
Orientation: Print flat
Supports: Not required
Infill: i printed it solid
Layer height: 0.2 mm works well
Notes
This part is designed to be a snug fit; tolerances are intentional so it stays in place while riding