1 / 3
Rocker Trim Clip for Hyundai // Kia
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the stem is 4.9 mm and was still a tight fit for me. you'll want a good calibration and a couple test prints.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
I needed a rocker clip for the roof liner of my trunk and nobody made one yet so here you go world. You will want a good calibration on you printer as the tolerances are tight. print in nylon if possible petg is working for me so far but avoid pla.